Some related information about wire processing? I believe many friends are still unclear about it. In order to enhance everyone’s understanding, the editor will introduce this issue in detail below. If you are interested, let’s take a look! If you are also interested, you may wish to come here to check it out.

Wire processing is also a popular product now. But many people still don’t understand its function. The first thing we need to know is that wire processing has a sealed container for coolant. On the opposite side of the closed container, there are inlets and outlets for wires or strips to pass through, and multiple sets of conveying rollers are set outside the closed container so that the wires or strips can continuously pass through the closed container and be impacted in the closed container. Processing, the device can continuously introduce large plastic deformation, and the coolant can maximize the temperature rise during the impact of the ultrasonic roller. Combined, a special low-temperature impact fine-grained structure can be obtained, in which case the mechanical properties of the wire can be significantly improved. During the severe plastic deformation process of wire processing, recrystallization and grain recovery occur internally at the same time, and a balance is reached under the joint action of the two. Therefore, the small grain size that the material can achieve in this case is also well determined. Process conditions, so reducing the temperature factor has a significant effect on inhibiting grain recovery, and smaller grain sizes can be obtained.

Wire processing is now a versatile engineering material with the unique feature that one size is much smaller than the other, so its structure is somewhere between large and small materials. Obviously as the wire processing thickness decreases, the ultrasonic vibration acting along the thickness direction should fully introduce the SPD across the entire wire piece, but you also see that there is no high-performance ultra-fine and ultra-fine metal wire wire making technology and equipment. Its characteristic is to use ultrasonic plastic waves to apply high-frequency, high-strain rate ultrasonic vibration impact to micron-sized sheets or wires, so that ultra-fine wires or ultra-fine strips can efficiently and uniformly produce large plastics. deformation, significantly refining the grains; experimental studies and simulations have shown that this process can effectively refine the grains in the thickness direction of micron-level wires or strips. The size and shape of the grains are evenly distributed, which can significantly improve the performance of the wire or all wires. the quality of. Mechanical properties of steel strips. In addition, wire processing achieves effective grain refinement of micron-level wires or strips in the thickness direction, with uniform grain size and shape distribution, significantly improving the comprehensive mechanical properties and tape. If you don’t understand anything, you can call us for consultation at any time. You can see the contact information by entering the official website. You can also consult the online customer service staff.

The content of the above article is some relevant information about wire processing introduced by the editor. If you didn’t know it before, you can take a look now. In the next issue, I will tell you some knowledge points related to it. Remember to come and watch.